IP DECT R4 SLAVE

[maxence]

Hello,

I have :
- DECT R4 Master mode : IPBS[3.1.16], Bootcode[3.0.26], Hardware[IPBS1-Y3 /1D] : work fine
- DECT R4 Slave mode : IPBS[3.3.11], Bootcode[3.0.26], Hardware[IPBS1-Y3/1B] : work fine

I want install new DECT R4 Slave mode, but i have "No connection to master. Firmware versions are not compatible. (Code 0x23)"
This new DECT R4 is : IPBS[3.3.11 C], Bootcode[3.0.26], Hardware[IPBS1-Z3 /1A]

Thank for your support

 

[Bas1234]

The new IPdect is a IPBS[3.3.11 C] <---- C = Compact. Make the new IPBS[3.3.11 C] the Master BS and the rest Slave.
Also put them all on the same Firmware.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (

http://tinyurl.com/bas1234

)
___________________________________________

 

[maxence]

sorry, its OK .
I forgot to update this born for ipo500...
For you information, this borne COMPACT is work fine in SLAVE mode with a borne MASTER no COMPACT.

thank