IP Dect Base Station Inactive

[Bkpagos]

Hello.I have an IP Dect Base Station RFP32.
I have loaded the ADMM and i have created an ip trunk to the ip office.Also in the IP Office i have created the IP Dect Line.Licensing is also valid in ADMM.
The matter is Base Station is not active.What else i have to do to make it active,so that i can subscribe a 3711 handset?
I have not changed anything in the ip region,ip region is 1.

Please help, it's urgent!!!!

 

[intrigrant]

If the base station is not active then the license cannot work either.

Did you check if the ip address of the basestation is equal to the ip address of the ommmanager?
use the om configurator jar file to check/set values.

 

[Bkpagos]

The base station has been licensed and in the OM configurator the ip of the ADMM is the same with the ip of the base station.In the base station option in ADMM Web interface,in column "Active" it says " - " and so the handsets cannot subscribe.Also the green led is flashing on the base station and it is not stable.

Also i noticed that RTP port in IP Region is 1024 and VLAN is 7 for call control and 6 for Audio.These are the default options.Are these options right?

 

[Bkpagos]

Ok, i made it work.
It seems that you have to put the base station in a DECT Cluster in order to activate the base station,by default the Cluster option is unchecked.

Thank you very much for trying to help me.