Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ip connectivity

Status
Not open for further replies.

sha111

Technical User
Oct 16, 2007
80
CA
In the media server there was no restarts but in the log all devices lost IP connectivity. what could be the problem? how do we diagnose and resolve?

cm ver 3.x and s8720.

thanx.
 
Check with your network folks, there may have been LAN or WAN issues on switches and/or routers..
 
could be your IPSIs lost connectivity. What firmware are you running. I have that issue recently.Cabinet just reset.
 
You should connect to your IPSI's, and make sure "autonegotiation' is disabled, and I usually hard set the IPSI's and ethernet ports to 100MB/Full for the highest reliability.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top