Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Address of SIP Phone working in OSK4K

Status
Not open for further replies.

LineMann

Systems Engineer
Sep 28, 2020
11
IN
Hi...
If anyone know the syntax of command for finding out IP address of all SIP Phone working in Unify Openscape 4K.
Thanks in advance.
 
This command should display all IP-Phones with their corresponding IP's:
DIS-SBCSU:,OPTIDAT;
 
This command should display all IP-Phones with their corresponding IP's:
DIS-SBCSU:,OPTIDAT;
Thanks for the reply, I had sometime ago come across a command which gives only IP address in tabulated form. I forgot to note it down.
 
There is a HFA command that you may be thinking of - it gives the IP addresses in the tabulated form that you mention.
It only gives 0.0.0.0 for the SIP extensions.
Here is the HFA command for your records.
DISPLAY-SBCSU:TYPE=IPSEARCH,IPADDR="*"."*"."*"."*";
 
It works very well with UFIP devices. but there was a bug that was fixed with V10R1 RMX HF14 (new AMO SBCSU):

AB-SBCSU:9041,OPTIDAT;
H500: AMO SBCSU GESTARTET
+------ SPEZIFISCHE GERAETEDATEN --------- UFIP --------9041---------------+
| |
+------------------- ONLY FIRST REGISTRATION DATA SHOWN -------------------+
| IP ADDRESS: 192.168. 93.253 UA CSTA : FALSE |
| CLIENT TYPE: N/A EPID : SC9E3CE7 |
| UA STRING : (Unify WL4/5.0.2 [13.0000]) |
+--------------------------------------------------------------------------+

AMO-SBCSU-111 ENDGERAETE- UND S0-BUS-KONFIGURATION IN SWU
ABFRAGEN DURCHGEFUEHRT;
<
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top