IP 500, V2 and Expansion Module Phone 16 1

[divemaster1980]

IP 500 works great, I added the phone 16 expansion module. To do this I created a new config with all the internal modules in the IP 500 and the expansion module Phone 16. I sent the config to the ip office system and let it go through the reboot. The system went through the reload and it looks like everything took when I open the config on the system. The light on the Phone 16 is blinking green, does this mean its working like it should or do I have a problem with it.

 

[budbyrd]

It should be solid green. If it is a 500 V1 it may need upgraded.

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'

 

[joe2938]

Also unplug ip 500 and expansion module, now power up expansion module 1st then the ip 500

 

[divemaster1980]

That was the trick, just had to power everything down then power up the module first. Thanks for your assistance. I guess I'm over thinking things these days, been working on too many Cisco VoIP systems, Avaya makes their system much easier to understand and work on.