Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP 500 Replaced 16 port Digital Board

Status
Not open for further replies.

telcorookie

Technical User
May 21, 2009
141
Our 16 port digital board fried the other day. We recived our new board today. Upon plugging the board in and rebooting the ip office, none of the phones are booting up. In manager the software on the board is showing 4.1 (31) when everything else is useing 4.2 (14). Any ideas?
 
That is actually 2.1.31, it needs upgrading then it will show 6.2.14 :)

ACS - IP Office Implement

"What the Crocodile Hat....was that?
 
To updgrade it, do i have to use the serial port on back? Or is there a way to upgrade through manager?
 

You may need to upgrade the software level on the board to match that of the system as peripherals such as cards and modules are shipped on a default software build.

All the best
 
Use Manager...File, Advanced , upgrade make sure you change the directory to the 3.2.999 folder within the Manager folder and upgrade to that first then change it back to the Manager folder and upgrade again to the final level :)

ACS - IP Office Implement

"What the Crocodile Hat....was that?
 
In the manager application file > advanced > upgrade and then select the module you need to upgrade (check what level you manager software is currently running to see it matches the software level of the system so in your case 4.2(14)
 
The module just showed up in upgrade wizard, sorry for the post above. Thank You much for your help
 
telcorookie, look above...don't forget the 3.2.999 step or you will get some issues you will not like :)

ACS - IP Office Implement

"What the Crocodile Hat....was that?
 
As amr says make sure you change the working directory to 3.2 999 good luck
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top