Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP 500 - ATA Adapter question

Status
Not open for further replies.

araq44

MIS
Aug 19, 2010
6
US
Can we use a Linksys PAP2 adapter for cordless POTS phones? Is there another ATA device that will work if the linksys does not? The Avaya one is expensive for being a ATA device.

We keep losing expensive Avaya VoIP wireless phones in shipping receiving and I would just rather use a cheap POTS $50 special from a retailer since the life span on the cordless phones is less than a month in our office.

 
I have worked with the PAP2T and the SPA2102 both worked great even when you wan't to use it for a FAX.

You need a PAP2T or SPA2102 and an "Avaya 3rd party IP end point" licence. And 15 min of config time if you know how to set them up.



Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________
 
Thanks, always good to double check and make sure I was not wrong.

Have a great day!

Best regards,
-E
 
Indeed but they have 100.000 settings are complicated.


BAZINGA!

I'm not insane, my mother had me tested!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top