IP 412 3.2.57 1

[vikas33]

My Avaya is Rebooting with the following error. Anyone know whats going on?

45928mS PRN: AVRIP receive from pbx a01340a count = 0
46063mS PRN: Recv: GatekeeperRequest 0a010a09
46081mS RES: Thu 9/4/2009 14:43:14 FreeMem=11646192(20) CMMsg=5 (6) Buff=200 839 826 59 2 Links=9886 Elements=91
46524mS CMLineRx: v=5
CMAlerting
Line: type=Q931Line 5
Call: lid=0 id=1029 in=0
Product Unknown
IE CMIEProgressIndicator (30) cs=CMCSITUT (0), loc=CMLPublicNetLocalUser (2), pd=CMPDInbandPattern (8)
46524mS CD: CALL: 0.1028.0 BState=Ringing Cut=3 Music=0.0 Aend="RenukaD663(663)" (21.5) Bend="Line 5" [Line 5] (1.24) CalledNum=17144532898 () CallingNum=663 () Internal=0 Time=7898 AState=Dialled
46524mS CD: CALL: 0.1028.0 BState=Ringing Cut=3 Music=0.0 Aend="RenukaD663(663)" (21.5) Bend="Line 5" [Line 5] (1.24) CalledNum=17144532898 () CallingNum=663 () Internal=0 Time=7898 AState=Ringing
46525mS CMExtnTx: v=663, p1=3
CMAlerting
Line: type=DigitalExtn 7
Call: lid=0 id=1028 in=0
Called[17144532898] Type=Default (100)
BChan: slot=21 chan=5
Product Unknown
IE CMIEProgressIndicator (30) cs=CMCSITUT (0), loc=CMLPublicNetLocalUser (2), pd=CMPDInbandPattern (8)
Display [17144532898]
Timed: 09/04/09 14:43
46714mS PRN: AVRIP receive from pbx a010b0a count = 0
46714mS PRN: VPNN: adjacent dest a010b0a reasserts over remote a01290a
46714mS PRN: VPNN: Remote a010b0a on a01290a gone away
46787mS PRN: 01f7b17c 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
46787mS PRN: OSBuffer::Alloc Out Of Buffers 1051

********** contact lost with 10.1.10.10 at 14:43:35 9/4/2009 - reselect = 87 **********
******************************************************************


My alarm shows

3003mS PRN: ALARM: 07/04/2009 -1:-1:-2113 <corrupt IDS> <<corrupt ES>> CRIT RAISED addr=41a2ffff d=-541130753 pc=ffffffff ffffffff dfffffff ffffffff fbffffbf ffffbfff

 

[intrigrant]

0900ASKAVAYA

 

[mattKnight]

My guess is a corrupt config

Default the unit, upgrade back to the same firmware level and test. If it stays stable at this stage, try uploading a copy of the config. If it fails, you'll need to default againg and then, bit by bit, re-type the configuration.

Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.

 

[johntechincal]

Hi Mattking,

I have IPO 406 with me and have the same problem.

I manage to resolve the problem by setting it in default using AT Commands.

of course you have to backup first the lic.

 

[johntechincal]

ohh sorry MattKing this is for Vikas33.

 

[Bas1234]

Check this thread, what ipo version?

http://www.tek-tips.com/viewthread.cfm?qid=1456487&page=7

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________