IP 406 Embedded VM time Changing 1

[nekau]

I have an issue where the system periodically changed its time to 2.5 hours forward. A reboot of the system sets it back.

How can I determine where this is coming from, or how can I change the system from accepting time from elsewhere?

 

[aarenot]

In manager, system, what does the the time server IP address read? You can tell it which IP address to get its time from there. It is probably set to broadcast, so it is looking around for a time server PC to grab time from.

 

[nekau]

Its set to 0.0.0.0.

But it is the Time Service protocol, and not NTP.

How should this be normally configured?

I am familiar with NTP, but not TS.

 

[aarenot]

That setting is to aquire via broadcast I beleive. Set it to a specific IP, which you have control over its clock. It will then at least stop doing a broadcast request for the time.

 

[nekau]

Thanks, I have set it to look at the PC running the Phone manager Application.

This seems to have done the trick.

Thanks very much.

 

[aarenot]

no problem, glad to help.