Inventory handsets on option 11 2

[nvrmaried]

Hello,

I need to inventory the amount of digital handsets, broken down by what model they are. (2616, 2008, etc)
I can inventory the whole 2000 range, but I need to get more specific if possible.

Thank You in advance,

Steve

 

[bhassell2000]

ld 117

inv gen sets

after you get the message that the inventory is complete

inv prt sets

this will give you a complete list of sets, set types, TNs

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[Firebird Scrambler]

If you save the information as a *.csv, then it's easy to load it up in excel.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[bhassell2000]

example


>ld 117
OAM000

MEM AVAIL: (U/P): 881266 USED U P: 210178 88203 TOT: 1179647
DISK RECS AVAIL: 408
SURVIVABILITY AVAIL: 0 USED: 0 TOT: 0
=> inv gen sets
Generate set inventory
Started successfully

=>
MAT011 Inventory sets generation complete



=> inv prt sets
Set inventory:
15 4 2011 10 12 25, 15 4 2011 10 16 40, 118
3903, 04 00, M3903 NTMN12DA 70 03 C4FA94, 802 , 55793
3903, 04 01, M3903 NTMN12DA 70 03 C50C96, 803 , 55795
3903, 04 02, M3903 NTMN12DA 70 03 C50C8C, 807 , 55794
3903, 04 03, M3903 NTMN12DA 70 03 C57586, 808 , 55784
3903, 04 04, M3903 NTMN12DA 70 03 C50EC7, 809 , 55791
3903, 04 05, M3903 NTMN12DA 70 03 C50C76, 811 , 55782
3903, 04 06, M3903 NTMN12DA 70 03 C50C99, 811 , 55790
3903, 04 07, M3903 NTMN12DA 70 03 C50CB1, 813 , 55786
3903, 04 08, M3903 NTMN12DA 70 03 C50CC2, 814A , 55825
3903, 04 09, M3903 NTMN12DA 70 03 C50CB7, 886B , 55823
3903, 04 10, M3903 NTMN12DA 70 03 C50CA7, 817A , 55826


Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[nvrmaried]

This is what I need, but I get an error for "inv".

=> INV GEN SETS
SCH0099 INV?

Any thoughts?

Steve

 

[bhassell2000]

what software are you on?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[bhassell2000]

you can do a full TNB and use the MVS spreadsheet to sort out the sets

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[nvrmaried]

Not sure about the software.
I am using hyperterminal on a PC connected directly to the system.

 

[GHTROUT]

It is

>ld 117
OAM000

=> inv generate sets

Then wait...until it says done, then

=> inv prt sets



As for the TNB method, MV stoped development 6 or so years ago - it is now Conversion Utility, at

http://www.ghtrout.com/files/ConversionUtility(BARS-TNB-More)_by_DB.zip

--
Nortel Resources at GHTROUT.com
--

 

[nvrmaried]

I will try that. Ultimately I downloaded mv.xls from

http://www.pepedog.com/meridian/.

Saved output of TNB to a txt file and ran the excel macro.
Worked great for what I needed.

Thank you all.

Steve

 

[Firebird Scrambler]

Buddy's link to Gene's website has my updated version of Pepedogs which does more as it shows a wider range of functions.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.