Intuity/Switch Link Question

[PBXmann]

Hi - We had two definities hooked up to our Intuity Audix. One was Switch 1, one was Switch 4. We no longer have Switch 1 hooked up, so I removed it from the screen shown below. When I try to modify the remaining link to be switch number 1 (instead of 4), it no longer talked to the switch. Is there something I have to change in the switch also? Thanks.



Switch Link Administration

Switch Link Type : LAN Country : UNITED STATES
Extension Length : 5 Switch : DEFINITY OVERLAN
Host Switch Number: 4
AUDIX Number : 1

Switch IP Address/ TCP Switch IP Address/ TCP
Number Host Name Port Number Host Name Port

4 172.20.211.12 5002

 

[BuckWeet]

its under your 'change comm processor-channels'

there is a switch # there..

 

[PBXmann]

I tried changing the 4 (below) to a 1, and also changing on the audix form in my first post, from 4 to 1, but they still won't talk. I just get fast busy when I dial the lead number of the Audix hunt group.

display communication-interface processor-channels SPE A
PROCESSOR CHANNEL ASSIGNMENT
Proc Gtwy Interface Destination Session Mach
Chan Enable Appl. To Mode Link/Chan Node Port Local/Remote ID
1: y audix s 2 5002 audix1 0 4 1 1
2: n 0