I am using winAVR to program the ATmega8 chip. The program spans multiple files. The interrupts are written using the SIGNAL keyword and the definitions from the iom8.h file as below (the receive complete vector). Can anyone figure out why the interrupts are not actually being called?
SIGNAL(SIG_UART_RECV){
*/
// R26 = UDR;
// Add your own code here if desired...
dummy = 15;
}
SIGNAL(SIG_UART_RECV){
*/
// R26 = UDR;
// Add your own code here if desired...
dummy = 15;
}