International calling and PRI (011 not sent) 2

[jermudgeon]

On my Option 11C, outbound international calls sent over PRI are stripping the 011, and setting TON/NPI to International. I'd like to prevent the 011 being stripped, but can't find where it's being done.

I'm not using BARS, as far as I can tell; AC1 is 6, and I'm using 9, a trunk ACOD, over a TIE route.

Any ideas on where the 011 is being handled?

Thanks,
jermudgeon

 

[allenmac]

Look at your NET_DATA in your customer data block and see if your INTC is 011.

Are you having problems with your carriers rejecting those calls?

 

[jermudgeon]

@allenmac,

I'm not finding INTC in my NET_DATA:

TYPE NET_DATA
CUST 00
OPT RTD
AC2 LOC
FNP YES
ISDN YES
PINX_DN
MBG 0
BSGC 65535
HNPA
HNXX
HLOC
LSC
RCNT 5
OCLI NO
TRNX YES
EXTT YES
FTOP FRES
VNR NO
NIT 8
FOPT 14

I'm the carrier, as in I'm using TIE lines to pass these calls over to an Asterisk box. At ghtrout's suggestion I tried DID, but had the same problem. I don't have any INTC listed in my LD15 pdfs!

Ouch and thanks,
Jeremy

 

[jermudgeon]

I may have found a solution.

I changed the ACOD on the route from 9 to something else.
I created a TSC from 9 to the RLI that includes the route.
The 011 is no longer stripped.


Jeremy