Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Internal network through VPN access on PIX.

Status
Not open for further replies.

tdoma

IS-IT--Management
Aug 13, 2003
94
US
Please help.
I have setup a remote access vpn solution using PIX 515E. Remote users are able to connect successfully to the vpn device, but they cannot ping or \\unc to network resources.
Briefly my configuration is as follows:

ip address inside 192.168.212.1 255.255.255.0
ip local pool COREVpnPool 192.168.254.1-192.168.254.254

access-list nonat permit ip 192.168.212.0 255.255.255.0 192.168.254.0 255.255.255.0

access-list allowinternet permit ip 192.168.212.0 255.255.255.0 192.168.254.0 255.255.255.0

vpngroup COREVPN dns-server 192.168.212.2
vpngroup COREVPN wins-server 192.168.212.2

Based on the above config, will the 2nd access list as written permit traffic from the vpn pool to access the network resources? Do I need to create static from the vpn pool to the inside network?

Thank you in advance for your help.

 
Have you sorted this problem out?
I am having the same type of problem...
 
All I ended up doing was creating both lmhost and host files for the local network, and that works fine.
Good luck.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top