Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
internal emegency notification on console
- Thread starter optonic
- Start date
- Thread starter
- #2
I don't know of there is an easier way to do it, but this should work if you have an extra LS and ONS port available.
Change your ext 222 for something else (333)
Connect your available LS and ONS port together.
Create an analog extension with this available ONS port.
Create a trunk with this LS port a put it as the only member of a trunk group.
In the ARS, create an emergency route with that trunk group.
In the ARS Dial Digit, create 222 with 0 digit to follow and the route you previously created.
In the digit mod, delete 3 and insert (333)
So if you dialed 222, it will take the emergency route, take the internal analog extension and dial 333.
Change your ext 222 for something else (333)
Connect your available LS and ONS port together.
Create an analog extension with this available ONS port.
Create a trunk with this LS port a put it as the only member of a trunk group.
In the ARS, create an emergency route with that trunk group.
In the ARS Dial Digit, create 222 with 0 digit to follow and the route you previously created.
In the digit mod, delete 3 and insert (333)
So if you dialed 222, it will take the emergency route, take the internal analog extension and dial 333.
- Status
Similar threads
