Internal calls to Tie showing outside CLID not DN

[agpham]

I have a tie line going from Meridian to a Definity.

Meridian ---> Definity displays external number (e.g., 516-555-1212)

Definity ---> Meridian showing internal DN (e.g., 1212)

How can I configure the Meridian to send internal DN to Definity on internal calls and external CLID on external incoming calls?

 

[johnpoole]

mark your rdb as int and check the pni numbers (they need to match) and the rcap entries in the dch

john poole
bellsouth business
columbia,sc

 

[agpham]

No go.

The LD16 RDB is showing RCLS: INT, there is no RCAP prompt, PNI is 000000.

However, I checked in LD 17 for the DCH build-out and RCAP = NDS. I could not change the RCAP in LD 17, gives me SCH0531. Here's the definition:

SCH0531 Unable to match input with stored mnemonics.
Action: The RCAP prompt in overlay 16 has been answered NDS when QSUr
QSIG GF are not accessible or with an inappropriate interface configured
(e.g.SL1). Reconfigure accordingly.

Any other ideas?

 

[Avaya911PLM]

How are your calls routed? DSC? SPN? to the Definity. Also you can apply a DMI table to those calls that only modifies the call type. Example:

REQ NEW
CUST 0
FEAT DGT
DMI xx
DEL
INST
CTYP CDP

--
Fletch
Visit the Nortel Technical Support Portal at:

http://www.nortelnetworks.com/support

 

[agpham]

Calls are being routed via CDP to Definity. Creating a DMI to absorb digits will not work as it will absorb needed digits also.


---

Andy Pham, ACS/FS-IT
Honeywell International, Inc.
andy.pham@honeywell.com

 

[Avaya911PLM]

Agreed. I am not saying to use the DMI to modify digits, I am using the DMI to set the Call Type (CTYP).

CDP will Send DN
ESN will send HLOC+DN
NXX will send NXX+DN
NPA will send NPA+NXX+DN

Assuming the CLID tables are set correctly.

--
Fletch
Visit the Nortel Technical Support Portal at:

http://www.nortelnetworks.com/support

 

[agpham]

Your reference assuming CLID tables are set up correctly would only apply to ESN, NXX and NPA and exclusive of CDP, correct?

In theory if one uses DMI/CTYP of CDP, the bare DN would be sent with no corrolation to what is in NET_DATA CLID tables, right?



---

Andy Pham, ACS/FS-IT
Honeywell International, Inc.
andy.pham@honeywell.com

 

[Avaya911PLM]

Correct. I had CDP on that list, but in reality CDP CLID in not controlled by a CLID table.

--
Fletch
Visit the Nortel Technical Support Portal at:

http://www.nortelnetworks.com/support