Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Internal Analog Set Recall Question

Status
Not open for further replies.

Andyuk1

Technical User
Sep 6, 2011
15
GB
I have an BCM50 with 2 Internal Analog sets. How can I access features from the Analog sets. I know with an ATA2 you use the 'Recall' button, but this doesn't happen on the Analog set, have I missed a setting ? whenIi press Recall followed by *I just get NU tone.

Andy
 
That's a shame then.

Originally I had an ATA2 which worked but didn't support CLI. I buy Keycodes for Internal Analog sets only to find out that Internal Analog sets don't support T/B Recall. There are so many limitations here. Please correct me if I'm wrong.
 
Internal analog stations do the same as an ATA device would do + clid. The flash=link= T/B recall setting is ajustable in 100 ms increments in the system.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top