I am having isues with a tn464 hw13 fw 24 that has intermintent errors. The provider claims nothing on their end. So far I have swapped the board with a known good circuit and also swapped the csu with the same circuit. This was after I ran a span test to a hard loop at the smart card location from the pbx. I do notice when the board is busied out I still see intermintent errors in the log. Would this mean the issue is the pbx since the board is busied out?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
intermintent ds1 errors
- Thread starter jgreen17
- Start date
Similar threads
- Locked
- Question
- Locked
- Question