Intercom Zone Paging - NEAX 2000 IVS

[Netmagus]

Does anyone know how to see the extensions in a group and how to go about adding them if they are not?

 

[Fixin]

Command 5600 is group 0. 5601 is group 1. up to 5607 is group 7. up to 16 members in each group so 5600 DE 00 DE shows the first phone in group 0. 5600 DE 15 DE shows the last member.

 

[Netmagus]

That's a big help, thanks! Am I understanding that you press 50 to page all the groups or is this limited to only group 0?

 

[Fixin]

50 calls group 0. 51 to 54 calls group 1 to 4. internal all call needs a number programmed as A164 in command 200.

 

[Netmagus]

Gah! And I was doing so good. I get to 200, access code 50 and it's set to A64. I know 50 had been previously set to page all the phones in the groups. What I want to do is make a separate fifth group and have 50 page the first four (group 0-3) and 51 page the fifth (group 4). Thank you for your time and patience!

 

[Fixin]

Use group 7 and in 200 make 51 be A37. Groups 6 and 7 are not paged with all call.