Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Inter-Tel Axxess 5.3 Adding non-associated mbx to DSS

Status
Not open for further replies.

DNeely1

Technical User
Jul 5, 2006
1
US
I'm fairly new to the Inter-Tel Axxess software and I'm having problems adding phantom mailboxes to our DSS. This version of the software is asking for an associated device, which I these mailboxes don't have. Any help would be greatly appreciated.

David
 
Opps, I forget that one.

Maybe so one can help you with this.
 
You might have already solved your problem by now.....but here's the answer.


Create a CRA application for each unassociated voicemail box. Make sure to remove the day and night greeting from each CRA. Program the digit translations in each CRA's time out to transfer to mailbox <number>. Then you can program each button on the DSS as a that mailbox's CRA that you created.

Another way is to create a Hunt group as the same ext. as the voicemail box. A box will appear that say's there's a conflict. Clcik ok to fix and associated voicemail box with huntgroup. Make sure to add some device that is not a physical extention as a memeber or else it won't work. The advantage of this setup is that any user can now dial that voicemail box and transfer to it with out having to hit the Vmail button first.

Hope this helps....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top