Integration: CS1000 to Cisco CME via BRI

[TudorAdrian]

Hi there Nortel gurus,

Just wondering if anybody here had the chance of doing an integration (TIE trunks) in between a Nortel Opt 11 / CS1000 PBX to a Cisco CME voice router using BRI interfacing.

It's a bit of a more unusual way to do it I know (usually you'd do E1/T1 QSIG) but this just landed on my desk as-is.

Many thanks all and "Happy New Year!" for 2014

 

[TudorAdrian]

Right, so to put this one to rest for good I managed to get it working in the end, although a bit different. My configs are posted below; Nortel as the "network" and Cisco the "user"; I could only bring it up using QSIG. Oh, and I'm in Europe (Ireland) so had to use A-law on the BRI and cptone IE (tones and cadences for Ireland).


*************************The wiring********************************
Amphenol (Nortel) RJ-45 (Cisco)
-------------------------- --------------------
White-Blue Solid Blue
Blue-White White-Blue
White-Orange Solid Green
Orange-White White-Green
*************************CISCO config****************************
!
interface BRI0/0/0
no ip address
isdn switch-type basic-qsig
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
!
!
voice-port 0/0/0
compand-type a-law
cptone IE
!
!
dial-peer voice 1 pots
description Incoming-Calls
incoming called-number .
direct-inward-dial
port 0/0/0
!
dial-peer voice 2040 pots
description Calls-to-Nortel
destination-pattern 204.
no digit-strip
port 0/0/0
!
*************************NORTEL - LD 16 Route config****************************
TYPE RDB
CUST 00
DMOD
ROUT 10
DES BRI
TKTP TIE
NPID_TBL_NUM 0
ESN NO
RPA NO
CNVT NO
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK YES
DGTP BRI
IFC ESGF
CLID OPT0
SIDE NET
CNEG NO
OVLR NO
OVLS YES
OVLT 0
MBGA NO
PGPN 1
RCAP COLP
ISDN YES
MODE PRA
PNI 00000
NCNA NO
NCRD NO
CHTY BCH
INAC NO
CPFXS YES
DAPC NO
INTC NO
DSEL VOD
PTYP DTT
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
SRCH RRB
TRMB YES
STEP
ACOD 8001
TCPP NO
TARG 01
CLEN 1
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
SIGO STD
STYP SDAT
MFC NO
ICIS YES
OGIS YES
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GTO 896
GTI 896
SFB 3
IENB 5
TFD 0
VSS 0
VGD 6
SST 5 0
DTD NO
SCDT NO
2 DT NO
NEDC ORG
FEDC ORG
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR NO
NATL YES
SSL
CFWR NO
IDOP NO
VRAT NO
MUS NO
PANS YES
MANO NO
FRL 0 0
FRL 1 1
FRL 2 2
FRL 3 3
FRL 4 4
FRL 5 5
FRL 6 6
FRL 7 7
OHQ NO
OHQT 00
CBQ NO
AUTH NO
TTBL 0
ATAN NO
OHTD NO
PLEV 2
OPR NO
ALRM NO
ART 0
PECL NO
DCTI 0
TIDY 8001 10
SGRP 0
ARDN NO
AACR NO
*************************NORTEL - LD 27 BRI trunks config****************************
>ld 27
REQ new
TYPE dsl
DSL 2 0
DATE
PAGE
NACT
TN 2 0 0 0
APPL BRIE
ISDN_MCNT 300
CUST 0
CTYP SILC
MISP 1
MODE NT
TKTP TIE
CLOK NO
PDCA 1
ROUT 10
T302 15
T310 120
B1
MEMB 1
TGAR 0
NCOS 0
CLS UNR APN
B2
MEMB 2
TGAR 0
NCOS 0
CLS UNR APN
DATE 13 SEP 2013
REQ end
*************************NORTEL - LD 86 RLB config****************************
REQ new
CUST 0
FEAT rlb
RLI 10
RLI 10 --------------->>>> this needs to point to the route you configured in LD 16
ENTR 0
LTER NO
ROUT 10
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
CNV NO
EXP NO
FRL 0
DMI 0
FCI 0
FSNI 0
BNE NO
SBOC NRR
IDBB DBD
IOHQ NO
OHQ NO
CBQ NO
ISET 0
NALT 5
MFRL 0
OVLL 0
*************************NORTEL - LD 87 DSC config****************************
REQ new
CUST 0
FEAT cdp
TYPE dsc
DSC 10 ------------------------>>>> I have extensions starting with 10xx in the CISCO so this is a wild card
FLEN 4
DSP LSC
RRPA NO
RLI 10
NPA
NXX

That's what worked for me. None of the other configs I've tried out there did the trick.
Hope this helps anybody who ever gets stuck with something similar.
Cheers guys!

 

[TudorAdrian]

Oh and Router is Cisco 2811 with:

- c2800nm-advipservicesk9-mz.124-10b.bin IOS
- VIC2-2BRI-NT/TE in slot HWIC 0