Wondering if anyone has any experience with connecting a Norstar MICS to a Cisco Router to process call over our private network(VoIP). Can I use a PRI between the 2 systems or do I have to use analog ports? I ve done this on an option 11 and 81 but I know the Norstar work a bit different. Any info anyone has would be appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Integrating Norstar MICS with Cisco 2851 router
- Thread starter tonerwand
- Start date
RikRodgers
Vendor
If you can emulate a T1/PRI, then you should be ok. Make sure MICS sw=7.1 to be safe.
curlycord
Programmer
This thread migjht help
=----(((((((((()----=
curlycord
=----(((((((((()----=
curlycord
- Status
Similar threads
- Locked
- Question