I have a 150E in a remote office. This office is being migrated to all Cisco IP Phones but the Hicom needs to still stay for PSTN connection. Is there a module I can insert into 150E that will give me an IP trunk connection to Cisco 2821 router (H.323 or MGCP)? Has anyone successful configured these 2 devices to communicate with each other? Thank you.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Integrating Hicom 150E with Cisco 2821 router
- Thread starter jigronius
- Start date
If you are only using the 150 as a POTS gateway then you may wish to simply buy a gateway.
If the site with the Hicom will continue to use the Siemens phones then you could use a T1 or PRI or Analog ports to talk to an IP gateway to integrate the two systems.
If the site with the Hicom will continue to use the Siemens phones then you could use a T1 or PRI or Analog ports to talk to an IP gateway to integrate the two systems.
- Status
Similar threads
- Locked
- Question