Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Intall guide for StarTalk Flash

Status
Not open for further replies.

nddtkle

IS-IT--Management
Nov 26, 2008
2
I have been assigned the task of installing a StarTalk Flash in our current system. I have the set up and users guides, but I do not have the installers guide. Does anyone know where I can get one? Really the only question I have is how to wire it.

Flash NT5B06EE-93 rel 02c w/ 4 ports
Software NT5B78DJ rel 03 version 1.5.0
 
You can get any documentation you might need off of the web site Wedophones.com. Then just click on Manuals and go to Nortel Startalk Flash Doc's.

Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige
 
It is real easy to wire up. Depending on whether it is a 2 port or 4 port Flash,cross-connect one or two extentions to a jack(s), plug in one or two line cords, plug in the power, wait 5 minutes and you're ready to program.
 
Thanks for your help. That is what I needed.
 
The installer guide has one other piece of good info for those. After you've got it connected and powered up, you'll have to press feature 903, then f9*1 to select your code range.

Then f983, pswd to configure.

That procedure disappeared with the flash, and has stumped many new techs.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top