Installing TN2501

[rtsoi]

I am trying to install a TN2501 announcement board by following this guide:

https://downloads.avaya.com/elmodocs2/s8700/r1_3cd/addhrd/AddIPHWa17.html

Under "Administer the TN2501", it says to enter command "change ip-interfaces" but that command doesn't exist on my CM.

I am running CM 7.

 

[kyle555]

you'd "change node-names" and add a IP and name for it.
Then, you'd "add ip-interface 1b10" to get that form if you put it in 1b10. You need to "add" that ip-interface you can "change" it.

 

[4merAvaya]

Try 'add ip-interface [slot]'.

kevin

 

[kyle555]

oh. And because the document you're looking at is so ancient, the commands may have changed a bit depending on what release you're running

 

[rtsoi]

Thanks