Installing DBI and DBD::mysql Perl Modules

[rbri]

Hello Everyone
I hope this is in the correct forum. I have a Itanium machine running HP-UX 11.23 that I am trying to load the DBI and the DBD::mysql modules on I keep getting what seems to be syntax error's when I run the "make" command trying to install the DBI module. Here is the error I get

" cc -c -Ae -D_HPUX_SOURCE -Wl,+vnocompatwarnings -I/usr/local/include -D_LARGEFILE_SOURCE -O -DVERSION=\"1.609\" -DXS_VERSION=\"1.609\" -fPIC "-I/usr/local/lib/perl5/5.10.1/IA64.ARCHREV_0/CORE" -DDBI_NO_THREADS Perl.c
<command-line>: error: missing '(' after predicate
*** Error exit code 1 "

Does anyone know what this error is trying to tell me. I don't see any parenthesis in the error I am not sure if there are suppose to be or not or if the error is even about the command listed. The DBD::mysql module will not install until the DBI module is installed.Thanks for any help.

I have successfully installed the NET::mysql so I am pretty sure the gcc compiler is working correctly.

Randy

 

[Annihilannic]

Are you certain it is running the gcc compiler and not HP's own cc there? You may want to try setting CC=gcc before running the make.

Annihilannic.

 

[rbri]

Yes, I confirmed that I am running the "gcc" compliler. Before I started the DBI/DBD install I changed the link under "/usr/bin/cc -> /usr/ccs/bin/cc" to
"/usr/bin/cc -> /opt/hp-gcc-4.4.0/bin/gcc"

I did it that way because I noticed that the Makefile.PL creates the Makefile calling "cc" not "gcc"

Thanks Randy

 

[Annihilannic]

Actually, I retract my previous advice.

I just downloaded DBI-1.609, unpacked and built it on an 11.23 system using the built-in cc (gcc is not even installed). So try undoing your symlinks perhaps?

I haven't tried DBD-mysql (yet).

Annihilannic.

 

[rbri]

Hello Well I tried the "cc" compiler I get a whole new set of error's. I am not sure if my problem is the Itanium platform or the "cc_bundle" compiler" Here are the error's I get when I use the "cc" compiler.

cc -c -Ae -D_HPUX_SOURCE -Wl,+vnocompatwarnings -I/usr/local/include -D_LARGEFILE_SOURCE -O -DVERSION=\"1.609\" -DXS_VERSION=\"1.609\" +Z "-I/usr/local/lib/perl5/5.10.1/IA64.ARCHREV_0/CORE" -DDBI_NO_THREADS Perl.c
(Bundled) cc: warning 922: "-Ae" is unsupported in the bundled compiler, ignored.
(Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, ignored.
Error 172: "/usr/local/lib/perl5/5.10.1/IA64.ARCHREV_0/CORE/perlio.h", line 222 # Undeclared
variable '__printf__'.
__attribute__format__(__printf__, 1, 2);
^^^^^^^^^^^^^^^^^^^^^
Error 172: "/usr/local/lib/perl5/5.10.1/IA64.ARCHREV_0/CORE/perlio.h", line 282 # Undeclared
variable '__printf__'.
__attribute__format__(__printf__, 2, 3);
^^^^^^^^^^^^^^^^^^^^^
Error 172: "/usr/local/lib/perl5/5.10.1/IA64.ARCHREV_0/CORE/perlio.h", line 286 # Undeclared
variable '__printf__'.
__attribute__format__(__printf__, 3, 4);
^^^^^^^^^^^^^^^^^^^^^
Error 172: "/usr/local/lib/perl5/5.10.1/IA64.ARCHREV_0/CORE/perlio.h", line 377 # Undeclared
variable '__printf__'.
__attribute__format__(__printf__, 1, 2);
^^^^^^^^^^^^^^^^^^^^^
Error 172: "/usr/local/lib/perl5/5.10.1/IA64.ARCHREV_0/CORE/proto.h", line 313 # Undeclared
variable '__printf__'.
__attribute__format__null_ok__(__printf__,pTHX_1,pTHX_2);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Error 172: "/usr/local/lib/perl5/5.10.1/IA64.ARCHREV_0/CORE/proto.h", line 490 # Undeclared
variable '__printf__'.
__attribute__format__(__printf__,pTHX_1,pTHX_2)
^^^^^^^^^^^^^^^^^^^^^
Error 172: "/usr/local/lib/perl5/5.10.1/IA64.ARCHREV_0/CORE/proto.h", line 529 # Undeclared
variable '__printf__'.
__attribute__format__null_ok__(__printf__,pTHX_1,pTHX_2);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Error 172: "/usr/local/lib/perl5/5.10.1/IA64.ARCHREV_0/CORE/proto.h", line 798 # Undeclared
variable '__printf__'.
__attribute__format__(__printf__,pTHX_1,pTHX_2)
^^^^^^^^^^^^^^^^^^^^^
Error 172: "/usr/local/lib/perl5/5.10.1/IA64.ARCHREV_0/CORE/proto.h", line 1812 # Undeclared
variable '__printf__'.
__attribute__format__(__printf__,pTHX_1,pTHX_2)
^^^^^^^^^^^^^^^^^^^^^
Error 172: "/usr/local/lib/perl5/5.10.1/IA64.ARCHREV_0/CORE/proto.h", line 2233 # Undeclared
variable '__printf__'.
__attribute__format__(__printf__,pTHX_1,pTHX_2)
^^^^^^^^^^^^^^^^^^^^^
Error 172: "/usr/local/lib/perl5/5.10.1/IA64.ARCHREV_0/CORE/proto.h", line 3108 # Undeclared
variable '__printf__'.
__attribute__format__(__printf__,pTHX_2,pTHX_3)
^^^^^^^^^^^^^^^^^^^^^
Error 172: "/usr/local/lib/perl5/5.10.1/IA64.ARCHREV_0/CORE/proto.h", line 3309 # Undeclared
variable '__printf__'.
__attribute__format__(__printf__,pTHX_2,pTHX_3)
^^^^^^^^^^^^^^^^^^^^^
Error 699: "/usr/local/lib/perl5/5.10.1/IA64.ARCHREV_0/CORE/proto.h", line 3309 # Error limit
reached; halting compilation.
__attribute__format__(__printf__,pTHX_2,pTHX_3)
^^^^^^^^^^^^^^^^^^^^^
*** Error exit code 2

Stop.


Thanks Randy

 

[Annihilannic]

Hmm... the system I tried on is using:

$ cc --version
cc: HP aC++/ANSI C B3910B A.06.02 [May 11 2005]

Which I believe is the optional ANSI compiler. I also tried on another IA64 11.23 system using:

$ cc --version
(Bundled) cc: HP aC++/ANSI C B3910B A.05.50 [May 15 2003]

That also seemed to work. Both systems are using ActivePerl perl 5.8.3, perhaps the significant difference here?


Annihilannic.

 

[rbri]

Hello

I checked and I am running the same cc bundled compiler as you are I am running a different version of Perl maybe that is causing my issue. My perl version is v5.10.1 (*) built for IA64.ARCHREV_0 .

Thanks Randy

 

[Annihilannic]

Are there any other installations of Perl on the system (which may not necessarily be in your PATH)? Does swlist Perl5-32 return anything? That package is usually installed in /opt/perl_32.

Annihilannic.