We are trying to install ARCserve 7 on a Netware 5.1 box from a Windows 2000 laptop. We installed it once before on an NSS partition and it wouldn't run properly so we removed it. Now when we try to install it again we are getting an error that says we have to be running a Netware client for Windows on our workstation. We are running the most current Netware client for Windows 2000 on our laptop. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Installing ARCserve 7 on Netware 5.1
- Thread starter kcookson
- Start date
- Thread starter
- #4
Hi,
I'm using AS7 on NetWare 5.1 environment and I'm installing it normally with Client 4.83 (Win2k Pro). Are you sure that you're logged into the server and it is set as your primary, as well as its tree? If you're not, AS Installer should give you a specific message, but, how knows...
I'm using AS7 on NetWare 5.1 environment and I'm installing it normally with Client 4.83 (Win2k Pro). Are you sure that you're logged into the server and it is set as your primary, as well as its tree? If you're not, AS Installer should give you a specific message, but, how knows...
- Status