Installing Analog Station Card In Remote Option 11

[number1telecom]

Customer has a main site with 2 cabinets and a remote site across the street connected via fiber. They want to install an analog station card (NT8D09DA/AL) in the remote location. There's an open slot for it.

My question is.. Can we only power down the remote location and install the card and will the main site see the card? Or do we need to power down both sides?

 

[bhassell2000]

should be no need to power down either side, just slide card into slot.

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[Firebird Scrambler]

Yep, I agree with Buddy and you should check that you have enough spare analogue licenses in LD 22 under SLT.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[number1telecom]

Got it. Thanks guys.