Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Installing AC-Win IP V2.0 R4.6.0 no connection

Status
Not open for further replies.

San J

IS-IT--Management
Jul 18, 2018
3
US
thread965-1778221


Hi Moriendi,
Need help please I install the ACWin IP to the third PC unfortunately there was no connection it is supposed to be saying on the below right side window Active like the rest of the pc but the third pc has no connection, all configuration were all correct,just wondering why it's not ACTIVE. please advise
 
In AC-Win configure, check you have the right audio devices selected, if they are wrong AC-Win does not go active.
 
Hi Moriendi, thanks for your immediate response I really appreciate it, I've already check but the audio devices were correct and still not active.
 
Difficult to say without seeing config. Can you post a reg-acsu; reg-vfgr; and a dis-aps:,psgl,y*;

Also a dis-bcsu:tbl for the slot where you added the console, and screenshots from your ac-win configure.

You haven't closed the call control window have you?
 
Just in case u missed it,
-Have you checked license?
-headset working?detected by the pc?



Best
Hertz
 
Dear Moriendi

Hi,
I have same problem Installed AC-win IP MQ V2 on my PC and I got a license for it, to test AC-win.
I inserted these commands:
ADD-WABE:2000,,,ATNDIND,N;
ADD-COSSU:,1,,,,,,,,"";
CHA-COSSU:COS,1,TA&TNOTCR&CDRINT&COSXCD&MB&HOT&CFNR&VCE;
CHA-COSSU:COS,1,FWDNWK&TTT&CFB&FWDECA&FWDEXT&CCBS&UUS1IM&UUS3;
CHA-COSSU:COS,1,CFKL;
CHA-COSSU:COS,1,,NOCO&NOTIE&CCBS;
CHA-COSSU:COS,1,,,NOCO&NOTIE&CCBS;
CHANGE-COSSU:LCOSV,1,,1&&64,,,,;
CHANGE-COSSU:LCOSV,1,,,,,0,;
CHANGE-COSSU:LCOSV,1,,,,,,"LCR ATTENDANT FOR VOICE";
ADD-ACSU:2000,1-1-6-2,0,11,11,,,ENG,ACWMQIP,NO,NO,1-1-100,,G711&EC&G729AOPT,,,,,,NO,,NO,"123456",G711P,,SECURE;
ADD-WABE:*9,,,ATND,N;
ADD-NAVAR:1,NONE;
ADD-VFGR:1,MQ,2000,1,,,,,,,,1,,5;
ADD-VFGKZ:ATNDGR,*9,0,,1;

ADD-BFDAT:1,HG3530&HG3550&SIP,BCHL120,;
CHANGE-BFDAT:CONT,1,HG3530,20,,1;
CHANGE-BFDAT:CONT,1,HG3550,5,1,;
CHANGE-BFDAT:CONT,1,SIP,5,,10;
CHANGE-BFDAT:OK,1,YES;

ADD-BCSU:MTYPE=IPGW,LTG=1,LTU=1,SLOT=6,PARTNO="Q2343-X",FCTID=1,LWVAR="0",FCTBLK=1,BCHL3530=1,BCHLSIP=10,BCHL3550=50,ALARMNO=0,IPMODE=IPV4,DHCPV4=NO,DHCPV6=NO;
ADD-CGWB:1,6,NORMAL,192.168.1.60,255.255.255.0,,,,,,,,,,,,,,,,;
CHANGE-CGWB:CGW,1,6,GLOBIF,,,213,NO,0,192.168.1.254,4060,"100MBFD",0,0,0,0,4061,0.0.0.0,0.0.0.0,NO,5060,5061;


and I have a Jabra BIZ 620 headset configured as atached photo, and installed CLA & CLM on same PC and copied License file in the Import folder (it run to license folder with some changes software made to it).

but still when I start AC-win IP MQ with password "123456" there is an error says "This is an unauthorized copy of AC-WIN".
is there any other command I had to insert before inserting these commands?

Best Regards
Hamid

 
The error message is nothing to do with those commands. The AC-Win is saying your license is not valid. Check for a license file in \program files <x86)\licensing\license agent\license. If you don't have one, that's the problem. Then check the error.log in the license agent\log directory, when was it last written, what are the contents.

Forget the OS4K config, this is purely a license error with AC-Win and your PC.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top