Installing a DSS/BFL Console? on a mics??? HELP!! 1

[bagman330]

JUST TRYING TO INSTALL A DSS/BLF ONTO AN ATTENDANT STATION, JUST NEED SOME BASICS. DO I NEED A STATION PORT OR DOES IT DAISY CHAIN TO THE 7324 SET???


THANKS
STEVE

 

[jackbeam]

Plugs into the bottom of the M7324 Phones. You will also need to change the setting in the KSU so it knows where the CAP is!

 

[Arr]

and requires a 24VDC feed on the orange pair.

PhM

 

[bagman330]

Where onthe 7324 does the CAP plug into? and one more thing, where do I get the 24 volts? should I have a seperate power wupply?

Thanks

 

[mroberts]

CONNECTING AND PROGRAMMING A CAP MOD TO A 7324

Hardware Connections
The Norstar® CAP module needs an external power source. A way of providing this source is by wiring in the VP324 24-volt DC power supply. In our example we have chosen to do this by the wiring diagram below using a 6 conductor modular
jack. The power supply can power two CAP modules. To connect second CAP module you will add another power pair to the 3rd pair on the 6 conductor modular jack. You can have a maximum of 5 CAPs “central answering positions” per system. The CAP can only be a 7324 and you can attach 2 CAP modules to a 7324.

Programming
1. Have the CAP modules attached to the telephone with power supplied.
2. Enter SYSTEM PROGRAMMING
3. Select SHOW and then select NEXT to CAP ASSIGNMENT
4. Select SHOW
5. Cap1: none is displayed, select CHANGE
6. Cap1: xxx, enter the extension number of the CAP with one or two KLMs
attached.
7. Exit programming MRoberts
mroberts@americaii.com
If you find a tip helpful, please mark it as such.

 

[mroberts]

You are going to need a Station Auxiliary Power Supply. (SAP).

If you will give me your fax number I will send over the wiring diagram that you need to install it. MRoberts
mroberts@americaii.com
If you find a tip helpful, please mark it as such.