installing a 3rd PRI

[sensey]

Hello to all. I have on my system 2 PRI on the KSU. Now i need to Install a 3rd one. I new that in release 7.0 will work. I upgraded to release 7.0 but still it doesnt work. My compleate configuration is this. 1 MICS with 2 DTI working as PRI. 3 fiber station mudule 1 ASM and 1 fiber trunk module. I have a service card for DTI.


any ideas

Thanks

 

[hawks]

What happens with the third one? Is it in the First slot of the Trunk mod with nothing else in the Mod?

 

[sensey]

Yes, is in the trunk module. in slot 1

 

[lugerlover]

must be on slot 6 in first fiberexp card

 

[senk1s]

slot 6 = topmost slot = module 8

Is the trunk module / fiber good?

 

[sensey]

yes. Is working prefectly. But in programming it never gives me the option of PRI just Loop E&M BRI-ST and BRI-U2

 

[cook1082]

Try Hardware to tell it the Card. Disable the mod then change the card to PRI.Not sure but you mite need Two Clock cards .Combo.

 

[firenut1]

you will definetely need two combo cards or it will not work.