Installed Phone 2 card; no new lines

[MightyMrMatt]

Hello all,

IPO 9.1, IP 500 V2 with a COMBO6210/ATM4 V2 card in expansion port 1. I installed a Phone 2 card in expansion port 2. Manager sees the card, but I don't see the two new analog lines from this card. Card is flashing orange. Am I missing a step in the setup or did I just get a bum card?

 

[sizbut]

Phone 2 is 2 new extensions, not lines (sorry to be pedantic but calling extensions "lines" is a very annoying hangover from ancient US telecoms).

Meanwhile, the card has several different LED flash rates slow/fast/every 5 seconds, so a bit more description may help.

Stuck in a never ending cycle of file copying.

 

[MightyMrMatt]

Sorry, LED 1 on the card is flashing orange at the regular heartbeat interval (every 5 seconds).

 

[MightyMrMatt]

After reviewing the stats on this card, I realized that this is not what I need. I need more analog trunks, not expansions. I'll have to exchange the card.

 

[Okkie26]

You need to add a ATM board on top of the phone2 card.

 

[sizbut]

Indeed, you need to put the analog trunk card onto a base card and the Phone 2 would do for that.

Stuck in a never ending cycle of file copying.