Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Installation TACACS+ on linux
- Thread starter leo74
- Start date
Probably not the answer you were looking for, but have you considered using RADIUS instead of TACACS?
- Thread starter
- #3
The tac_plus software (google) looks like the old cisco codebase and is more talked about then other offerings.
HTH.
HTH.
Tac_plus can be a bear to get right, but once you do it's rock solid. My suggestion is to use cutfiles for your device configs so you can enter the commands in the right sequence, and make sure you're connected via the console port - it's real easy to lock yourself out of the device. If I remember, the aaa auth commands have to go last.
As far as the daemon is concerned, as long as your keys are the same between server and device and you've created user accounts in your tac_plus.conf using generate_passwd to encrypt the passwords, you should be good to go.
As far as the daemon is concerned, as long as your keys are the same between server and device and you've created user accounts in your tac_plus.conf using generate_passwd to encrypt the passwords, you should be good to go.
- Status
Similar threads
