Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Installation on Rx2620 problem

Status
Not open for further replies.

tibal

Technical User
Feb 20, 2009
1
0
0
FR
Hi everybody,
I am going to install HP-UX 11.31 Integrity on the Rx2620, but i have a problem:
After rebooting system everything is ok but after this section system does not continue:

####################

0 0 0x0015B2 0x0000000002026268 boot time event
0 0 0x0015B2 0x0000000001822122 boot time event
0 0 0x0015B2 0x0000000002091937 boot time event
0 0 0x0015B2 0x0000000007559145 boot time event
0 0 0x0015B2 0x0000000009740750 boot time event
1 0 0x000081 0x0000000000000000 start I/O discovery
***********************************************************
* ROM Version : 04.10
* ROM Date : 08/01/2006
* BMC Version : 04.01
***********************************************************
0 0 0x0015B2 0x0000000016383585 boot time event
1 0 0x0000A4 0x0000000000000000 start memory configuration
0 0 0x0015B2 0x0000000035196756 boot time event
1 0 0x000014 0x0000000000000000 CPU0 starting cell relocation
1 0 0x000009 0x0000000000000000 CPU0 launch EFI
EFI version 1.10 [14.62]
EFI64 Running on Intel(R) Itanium Processor Family
EFI 1.10 IPF server rx2620 5.46 [Thu Nov 10 16:08:03 2005] firmware by HP

Copyright (c) 2000-2005 Broadcom Corporation
Broadcom NetXtreme Gigabit Ethernet EFI driver v7.0.10

Loading 'SysROM:Floating-Point Software Assistance Handler'...
-- 'SysROM:Floating-Point Software Assistance Handler' returned Success
Loading 'SysROM:SCSI Bus Driver'...
-- 'SysROM:SCSI Bus Driver' returned Success
Loading 'SysROM:SCSI Tape Driver'...
-- 'SysROM:SCSI Tape Driver' returned Success
Loading device drivers


EFI Boot Manager ver 1.10 [14.62] OS might use only the primary console set via boot manager or conconfig command
/----------------------------------\ /----------------------------------\ | System Overview | | Boot Menu | | hp server rx2620 | | HP-UX Primary Boot: 0/1/1/1.2.0 | | Serial #: DEH46426R8 | | HP-UX HA Alternate Boot: 0/1... | | | | HP-UX Alternate Boot: 0/1/1/... | | System Firmware: 4.10 [4631] | | EFI Shell [Built-in] | | BMC Version: 4.01 | | Internal Bootable DVD | | MP Version: E.03.28 | | Core LAN Gb A | | Installed Memory: 16384 MB | | Core LAN Gb B | | | | ------------------------------- | | CPU Logical | | Boot Configuration | | Module CPUs Speed Status | | System Configuration | | 0 1 1.6 GHz Active | | Security Configuration | | 1 1 1.6 GHz Active | | | | | \----------------------------------/ | | | | | | \----------------------------------/
Use <^|v> to scroll <ENTER> to Select <ESC> or <X/x> for Previous Menu
Set User Interface
EFI Boot Manager ver 1.10 [14.62] Firmware ver 4.10 [4631]

Please select a boot option

HP-UX Primary Boot: 0/1/1/1.2.0
HP-UX HA Alternate Boot: 0/1/1/0.0.0
HP-UX Alternate Boot: 0/1/1/0.0.0
EFI Shell [Built-in]
Internal Bootable DVD
Core LAN Gb A
Core LAN Gb B
Boot Option Maintenance Menu
System Configuration


Use ^ and v to change option(s). Use Enter to select an option
Loading.: Internal Bootable DVD
Searching for devices
Scsi(Pun0,Lun0) HP 73.4GMAX3073NC HPC1 (320 MBytes/sec)
Scsi(Pun2,Lun0) HP 73.4GMAX3073NC HPC1 (320 MBytes/sec)
HP 2Port 2Gb Fibre Channel Adapter (driver 1.49, firmware 3.03.154)
Broadcom NetXtreme Gigabit Ethernet (BCM5703) is detected (PCI-X)
HP 2Port 2Gb Fibre Channel Adapter (driver 1.49, firmware 3.03.154)
Broadcom NetXtreme Gigabit Ethernet (BCM5703) is detected (PCI-X)
Starting: Internal Bootable DVD

(C) Copyright 1999-2006 Hewlett-Packard Development Company, L.P.
All rights reserved

HP-UX Boot Loader for IPF -- Revision 2.035

Press Any Key to interrupt Autoboot
\EFI\BOOT\AUTO ==> boot :IINSTALL
Seconds left till autoboot - 0
AUTOBOOTING...> System Memory = 16363 MB
loading section 0
................................................................................................. (complete)
loading section 1
................. (complete)
loading symbol table
loading ram disk file :)IINSTALLFS).
.....................................................................................................................
(complete)
Launching :IINSTALL
[highlight #FCE94F]SIZE: Text:49429K + Data:8267K + BSS:22598K = Total:80294K[/highlight]
##################################################

My system remain this section for ever!!! :(
Would you please help me?

Regards.
 
Hello,

I think you have a hard prob
try to contact HP support
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top