Installation of VAL card (TN2501) on our DEFINITY

[Eliav]

Hi
I would like to know if we can install this card (TN2501) on our DEFINITY (G3V9) switch.


Software Load: R009i.05.1.122.4
Memory Configuration: G3siV9
Offer Category: A

LAST TRANSLATION LOADED INFORMATION

Software Load: R009i.05.1.122.4
Memory Configuration: G3si(medium)
Offer Category: A
Or we should continue to work with the old TN750C

Thanks.
Eliav

 

[Callmaster]

hi eliav ...

we have :
Software Load: R009r.05.0.122.2
and the val board works fine ...
but we use also 6 of the old 750c boards

With best regards
Callmaster

 

[Eliav]

Hi Callmaster
Thanks for your quick replay.
I was told to check in the disp sys-parm cus in the 4th page to option of R9.5 Capabilities? and it is marked "y" so i think we can install it.
So now i have another question - our dealer told us that thae card only come with 10 minutes recording time and in order to "open" it to 1 hour we will have to pay extra money for the license (more then 1.5 of the card price) - does anybody hard about it?
Thanks
Eliav

 

[98Converter]

look for this on page 5 or 6 of sys-para cust options:

TN2501 VAL Maximum Capacity? y


If it's Y I think you may all set... if 'n' then, not sure.

Thanks,
Chris

We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.

 

[eclemente]

You may also want to check sys cust. make sure that MAX number of VAL board has a value on it.


Edgar Clemente

 

[bwilch]

TN2501 VAL Maximum Capacity? y"

This determines if you have 10 minutes of space avaliable or if you have the full 60 minutes avaliable. Set to N = 10 minutes. Set to Y = 60

 

[Eliav]

Hi All
Thanks for all the replays.
We will probably will have to pay - the field is "VAL Full 1-Hour Capacity" in page 4 of "display system-parameters customer-options" and it is set to "n".
Thanks again for all the info.
Eliav