trentsteenholdt1
Technical User
Hi All.
This is actually my first post on tek-tips. So apologies foremost if I'm a little bit off the mark. I love this site! I use it all the time for its Nortel CS1000 forum posts, it's just taken me a life time to join. /sigh
Anyways, today... I finally recieved (long story) a quote to get an analogue NT5K02ADE5 FALC card installed into our Avaya/Nortel CS1000 r7.0 system. Well, frankly, I'm quite annoyed! The quote from the third party company has installation costs on par with the cost of the card itself (roughly 3k)! Which I know is nut's especially into reading some of the forum posts and how some folks just raise a support calls to get stuff like this installed after they physically commission it themselves.
So after a bit of reading tonight (on here), i've come to learn thats its actually pretty straight forward to install one of these things into the CS1000. From what i can see you just need to the following.
- Physically install the card into a spare IPE (expansion cabinet) slot,
- Slot the cabling in to the card slot on the back (done this before for PRI's and old DiGSet Card)
- Have Analogue licenses, which i'll have shortly (preordered)
- LD 10 > NEW > CARDSLT
- LD 32 enable the card after you got the first TN on Unit 00.
Well, thats all i can see to it. Though, I thought for the sake for someone who is willing to help a new timer to the forum out, I thought I would post some output on our current system. So people could actually help me in picking the right loop, cabinet and slot. If you know what i mean.
Our Inventory of the cards are.
and the ld 97 XPE PRT, just incase something isnt right with the configuration
remaining, the SUPL prt also in ld 97
Thoughts all?
So people know, I have experience with troubleshooting etc within cslogin, oam and pdt. Gosh, dealing with a Call Server in our sister CS1000 r7.0 nearly drove me nuts today.
Big Thanks to anyone that can help
!
Trent Steenholdt
Systems Engineer
The University of Notre Dame Australia
-Great scott!
This is actually my first post on tek-tips. So apologies foremost if I'm a little bit off the mark. I love this site! I use it all the time for its Nortel CS1000 forum posts, it's just taken me a life time to join. /sigh
Anyways, today... I finally recieved (long story) a quote to get an analogue NT5K02ADE5 FALC card installed into our Avaya/Nortel CS1000 r7.0 system. Well, frankly, I'm quite annoyed! The quote from the third party company has installation costs on par with the cost of the card itself (roughly 3k)! Which I know is nut's especially into reading some of the forum posts and how some folks just raise a support calls to get stuff like this installed after they physically commission it themselves.
So after a bit of reading tonight (on here), i've come to learn thats its actually pretty straight forward to install one of these things into the CS1000. From what i can see you just need to the following.
- Physically install the card into a spare IPE (expansion cabinet) slot,
- Slot the cabling in to the card slot on the back (done this before for PRI's and old DiGSet Card)
- Have Analogue licenses, which i'll have shortly (preordered)
- LD 10 > NEW > CARDSLT
- LD 32 enable the card after you got the first TN on Unit 00.
Well, thats all i can see to it. Though, I thought for the sake for someone who is willing to help a new timer to the forum out, I thought I would post some output on our current system. So people could actually help me in picking the right loop, cabinet and slot. If you know what i mean.
Our Inventory of the cards are.
Code:
inv prt cards
Card inventory:
12 7 2011 20 46 23, 12 7 2011 20 48 36, 23
PRI2, 20,
PRI2, 21, NTBK50AA08 NNTM673B5101
XCT-TDS/MF, 126, <Unavailable>
CONF, 127, <Unavailable>
XCT-TDS/MF, 130, <Unavailable>
CONF, 131, <Unavailable>
MGS , 000 0, NTDW59BA 2 NNTMC900JHVW
Nortel CPMG CS 0, 0 0 0, NTDW59xxxx UnknownSERN
XTD , 000 0 00, <Unavailable>
Nortel CPMG SS, 0 0 0, NTDW59xxxxxx UnknownSERNUM, frem-cores-cpmg.nd.edu.au, 1
72.16.30.10
MSDL, 000 0 01 , NTBK51AA00
ISDLC, 000 0 02,
MSDL, 000 0 04 , NTBK51AA00
EXUT , 000 0 07, NTVQ01ABE503 NNTMC900GKG4 201039
500 , 000 0 10, NT5K02AC 03 NNTM59000WGX 0000
DSPDB , 000 0 11, NTDW59BA R02 NNTMC900JHVW
DSPDB , 000 0 12, <Unavailable>
DSPDB , 000 0 13, <Unavailable>
DSPDB , 000 0 14, <Unavailable>
XTD , 000 1 00, <Unavailable>
DSPDB , 000 1 11, NTDW78AA R01 NNTMC900J5N7
DSPDB , 000 1 12, <Unavailable>
DSPDB , 000 1 13, <Unavailable>
DSPDB , 000 1 14, <Unavailable>
and the ld 97 XPE PRT, just incase something isnt right with the configuration
Code:
S0 S1 S2 S3 LOC DIS RGTP
remaining, the SUPL prt also in ld 97
Code:
SUPL SUPT SLOT XPEC0 XPEC1 SHLF ZONE0/1 IPR0/1
000 IPMG ---- -- - - -- - - 0 00001 172.16.30.11
1 00001 172.16.30.12
100 ---- ---- VIRTUAL -- - - --- --- - --- ---------------
104 ---- ---- VIRTUAL -- - - --- --- - --- ---------------
108 ---- ---- PHANTOM -- - - --- --- - --- ---------------
112 ---- ---- VIRTUAL -- - - --- --- - --- ---------------
Thoughts all?
So people know, I have experience with troubleshooting etc within cslogin, oam and pdt. Gosh, dealing with a Call Server in our sister CS1000 r7.0 nearly drove me nuts today.
Big Thanks to anyone that can help
Trent Steenholdt
Systems Engineer
The University of Notre Dame Australia
-Great scott!