My Harddisk is not booting up and its showing solid red on status and red blinking on mirror.I want to install image from 3 cds came with BCM.But I dont have keyboard and monitor on BCM.Is there anyway I can install Image on BCM through console or anyother way?I just have USB ports on BCM and I can login through console.Can I do Raid Mirroring through console or something else to rectify the same?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Installation from Imaging Cds
- Thread starter 786859
- Start date
You must have have a bcm 400, the keyboard,mouse and monitor connector are hidden behind the bottom faceplate on
your bcm.Remove power, unscrew the 2 bottom screw, pull the tray and behind the 2 bracket you'll see 2 more screws, remove them remove the front cover and insert back the tray. That way you will be able to connect keyboard ,mouse and monitor. You will also need the BIT software and a cd-rom drive to reimage your bcm. Make sure that the problem is not the base function tray, if you have green capacitors and they are bulged and leaked, that's a known issue on the bcm at that point you'll have to replace the BFT.
your bcm.Remove power, unscrew the 2 bottom screw, pull the tray and behind the 2 bracket you'll see 2 more screws, remove them remove the front cover and insert back the tray. That way you will be able to connect keyboard ,mouse and monitor. You will also need the BIT software and a cd-rom drive to reimage your bcm. Make sure that the problem is not the base function tray, if you have green capacitors and they are bulged and leaked, that's a known issue on the bcm at that point you'll have to replace the BFT.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
