Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Install Terror

Status
Not open for further replies.

BoulderBum

Programmer
Jul 11, 2002
2,179
US
I can't for the life of me get two test machines (connected together by a piece of cat 5 cable) to work on my "network". I'm trying to configure one as my domain controller, but can't get it to work, and am not knowledgeable enough to fix the problem (I know nothing about networks). Here are the errors I'm getting:





The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.

**********************************************


The DNS server was unable to complete directory service enumeration of zone ClubCross.local. This DNS server is configured to use information obtained from Active Directory for this zone and is unable to load the zone without it. Check that the Active Directory is functioning properly and repeat enumeration of the zone. The extended error debug information (which may be empty) is "". The event data contains the error.

**********************************************

The DNS server was unable to complete directory service enumeration of zone _msdcs.ClubCross.local. This DNS server is configured to use information obtained from Active Directory for this zone and is unable to load the zone without it. Check that the Active Directory is functioning properly and repeat enumeration of the zone. The extended error debug information (which may be empty) is "". The event data contains the error.

**********************************************

The DNS server could not configure the network connections of this computer with the local computer's IP address as the preferred DNS server, because this computer is connected to networks with different or invalid DNS namespaces. Manual configuration of the local DNS server to perform name resolution on one or more of the namespaces is required before the preferred DNS servers of this computer should be modified.

If the network connections of this computer are not configured with the local computer's IP address as the preferred DNS server, this computer may not be able to dynamically register DC locator records in DNS. Absence of these records may prevent other Active Directory domain controllers and domain members from locating this domain controller.

User Action:

Ensure that DC locator DNS records enumerated in the file %SystemRoot%\system32\config\netlogon.dns are registered on the local DNS server. If these records are not registered in DNS:
a) Add a delegation to this DNS server to parent DNS zone matching the name of the Active Directory domain OR
b) Configure the local DNS server with appropriate root hints and forwarders (if necessary) and configure the network connections of this computer with the local computer's IP address as the preferred DNS server. Note that other computers using other DNS servers as their preferred or alternate DNS servers may not be able to locate this domain controller, unless the DNS infrastructure is properly configured.
 
first question for u ??? you say 2 test machines with cat5 cable connected to each other!!

1. is it cross over cable

2. have you got a switch/hub on the network

i ask as you did say u new nothing about networking...

I haven't failed, I've found 10,000 ways that don't work.
Thomas Edison (1847-1931)
Heads :)
 
1. is it cross over cable"

Now I do. I didn't before yesterday night.

"2. have you got a switch/hub on the network"

No. I run an internet connection through a wireless router to my DC, but the only physical connection to the other test machine is via ethernet and the wired NICs.

"i ask as you did say u new nothing about networking... "

By all means, dumb it down. I really am clueless about setting up a network.
 
the wireless router how many ports does it have (ethernet connections) if it has 4 connect each machine to it with a straight wire con not cross over.

check if you have DHCP running on the router

the server what program is it running 2003 server???



I haven't failed, I've found 10,000 ways that don't work.
Thomas Edison (1847-1931)
Heads :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top