Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Install hp jetdirect 300x print server 1
- Thread starter Mipana
- Start date
-
1
- #2
You must install printers.hplj.* fileset and then configure your printer via
smitty spooler --> Add a Print Queue
Choose hpJetDirect from list
Select Hewlett-Packard Type
Choose Model from list
Choose if your server id a BOOTP/TFTP server (usually not)
Insert name of your queue in PCL BOX (If you want to print PostScript file you can create a postscript queue using PostScript box)
Insert HOSTNAME of your JetDirect Card.
Remember that after this step you must change print queue Characteristics to set, for example, PAPER SIZE, FONT, ORIENTATION ecc ecc
smitty spooler --> Add a Print Queue
Choose hpJetDirect from list
Select Hewlett-Packard Type
Choose Model from list
Choose if your server id a BOOTP/TFTP server (usually not)
Insert name of your queue in PCL BOX (If you want to print PostScript file you can create a postscript queue using PostScript box)
Insert HOSTNAME of your JetDirect Card.
Remember that after this step you must change print queue Characteristics to set, for example, PAPER SIZE, FONT, ORIENTATION ecc ecc
- Status
