instal unix hipath 4000 v2 1

[Milojko1973]

I need a procedure to instal reinstal-unix to HiPath 4000 V2,
I was raised by MOD
I put a new HDD
what next

 

[birdseye51]

Connect your PC to the service connector located on the right hand side of the ADP using a null modem connection.
Using a hyperterminal session, I think the speed is 115200 and 8,N,1.
Using your COMWIN session execute a soft restart on the ADP and then switch back to the hyperterminal session immediately and hopefully you should eventually get a screen saying press ESC to display UW7 functions.
Choose option 1 for first install from SCR.
After that it's just a matter of letting the Unix install with out any further intervention which will take any thing up to 1.5 hours.

Once installed you will then have to add the necessary configuration eg LAN card settings in Unix Base Administration.
After the first install you will be forced to change the password at login.

 

[Milojko1973]

right hand side ????

 

[birdseye51]

You said that the system is HiPath 4000 V2.

Is this CPCI hardware?

Could you display the DBC

DIS-DBC;

 

[Milojko1973]

REG-DBC;
H500: AMO DBC STARTED
EXEC-DBC:"4000 ",3;

AMO-DBC -111 DATABASE CONFIGURATION
REGENERATE COMPLETED;

 

[Milojko1973]

DIS-CDSM;
H500: AMO CDSM STARTED

CABINET ADDRESS: P101
CABINET TYPE : UACD
CODE NUMBER : G5405-X

SHELF : 1
FRAME TYPE : PSD
CODE NUMBER : B5427-X

CABINET ADDRESS: P201
CABINET TYPE : CSCPCI
CODE NUMBER : U6625-X

SHELF : 1
FRAME TYPE : CSCPCISM A1
CODE NUMBER : X7659-X
| HW ADDRESS | CURR. MOD. HW ABB |STATUS|FIRMWARE|
|------------+---------------------+------+--------|
| 1 | Q2311-X DSCXL | 4 | H062-N |

CABINET ADDRESS: P202
CABINET TYPE : UP
CODE NUMBER : G5408-X

SHELF : 1
FRAME TYPE : L80XF1 1
CODE NUMBER : B5389-X

CABINET ADDRESS: P203
CABINET TYPE : UP
CODE NUMBER : G5408-X

SHELF : 1
FRAME TYPE : L80XF1 2
CODE NUMBER : B5389-X

AMO-CDSM -111 CABINET CONFIGURATION DISPLAY OF SYSTEM SERVER
DISPLAY COMPLETED;
<DIS-CDSU;
DIS-CDSU;
H500: AMO CDSU STARTED

CABINET ADDRESS: P101
CABINET TYPE : UACD
CODE NUMBER : G5405-X

SHELF : 1
FRAME TYPE : PSD
CODE NUMBER : B5427-X

CABINET ADDRESS: P201
CABINET TYPE : CSCPCI
CODE NUMBER : U6625-X

SHELF : 1
FRAME TYPE : CSCPCISM (A)
CODE NUMBER : X7659-X
| PEN | CURR. MOD. HW ABB |STATUS|FIRMWARE|
|-----+---------------------+------+--------|
| 1 | Q2311-X DSCXL | 5 | H062-N |
| 7 | Q2312-X RTM | 1 | RTM2-7 |
| 7 | Q2312-X RTM | 1 | -08 - |
| 7 | Q2312-X RTM | 1 | -08 - |
| 7 | Q2312-X RTM | 1 | RTM2-7 |
| 7 | Q2312-X RTM | 1 | RTM2-7 |

CABINET ADDRESS: P202
CABINET TYPE : UP
CODE NUMBER : G5408-X

SHELF : 1
FRAME TYPE : L80XF1 1
CODE NUMBER : B5389-X

CABINET ADDRESS: P203
CABINET TYPE : UP
CODE NUMBER : G5408-X

SHELF : 1
FRAME TYPE : L80XF1 2
CODE NUMBER : B5389-X

AMO-CDSU -111 CABINET CONFIGURATION DISPLAY OF SYSTEM SWU
DISPLAY COMPLETED;

 

[birdseye51]

This is CPCI architecture.

As stated previously connect to the service port 9 pin connector on the ADP (DSCXL). It is actually labelled on the card. There are 2 of these connectors. One labelled modem and the other service.