inquire problems

[jjrinconbayon]

Hi,

i have a Sun Enterprise V490 with Solaris 10 as Backup Server. It is connected to a L700 robot with 10 drives LTO-2. These devices are connected over a brocade switch.
My problem es that i don`t see this devices with the inquire command

It is the probe-scsi-all command output

{2} ok probe-scsi-all
/pci@9,600000/SUNW,qlc@2
LiD HA LUN --- Port WWN --- ----- Disk description -----
0 0 0 21000014c309e990 SEAGATE ST314670FSUN146G055A
1 1 0 21000014c309e6f8 SEAGATE ST314670FSUN146G055A

/pci@8,600000/SUNW,qlc@2
************************* Fabric Attached Devices ************************
Adapter portId - 21700
Device PortId 21100 DeviceId 0 WWPN 500507630061a650
Lun 0 TAPE IBM ULTRIUM-TD2 4770

Device PortId 21200 DeviceId 1 WWPN 500507630061a5cc
Lun 0 TAPE IBM ULTRIUM-TD2 4770

Device PortId 21500 DeviceId 2 WWPN 500507630061a8ee
Lun 0 TAPE IBM ULTRIUM-TD2 4770

Device PortId 21600 DeviceId 3 WWPN 500507630061aa82
Lun 0 TAPE IBM ULTRIUM-TD2 4770

Device PortId 11600 DeviceId 4 WWPN 500507630061f9c5
Lun 0 TAPE IBM ULTRIUM-TD2 4770

/pci@8,600000/SUNW,qlc@1
************************* Fabric Attached Devices ************************
Adapter portId - 21300
Device PortId 110ef DeviceId 0 WWPN 500104f0006e3ab3
Lun 0 CHANGER STK L700 0304

Device PortId 11100 DeviceId 1 WWPN 500507630061fa71
Lun 0 TAPE IBM ULTRIUM-TD2 4770

Device PortId 11200 DeviceId 2 WWPN 500507630061fd48
Lun 0 TAPE IBM ULTRIUM-TD2 4770

Device PortId 11300 DeviceId 3 WWPN 500507630061fd72
Lun 0 TAPE IBM ULTRIUM-TD2 4770

Device PortId 11400 DeviceId 4 WWPN 50050763136005d7
Lun 0 TAPE IBM ULTRIUM-TD2 4770

Device PortId 11500 DeviceId 5 WWPN 500507630061e19d
Lun 0 TAPE IBM ULTRIUM-TD2 4770

/pci@8,700000/scsi@5,1

/pci@8,700000/scsi@5

Thanks,
Juanjo

 

[jouell]

what is the output of inquire?

 

[badinode]

which HBA(s) are you using?

 

[dprincipe]

Did you run the lus_add_fp_devs script?
This is what you have to do with solaris versions up to Solaris 9 when using FC tapes.

HTH,
Dario

 

[keefb]

have you tried inquire -l to rescan the lun's

Regards
KeefB

 

[wolfheader]

have the device_name at directory /det/rmt?

use 'luxadm -al' can see what

check the HBA driver~~

 

[almhund]

Are you sure that the Lun`s are not be invisible with Lun Masking from the Brocade Switch?

 

[Novelli]

Hi having the same problem,

in solaris 10 the lus driver is no longer used an generic SCSI Driver is used.

In my case i have emulex and still the same problem but you using differnt haba´s, maybe that helps what i found

http://softwaresupport.emc.com/WcmprodData/tech_papers/bulletins/420.html

Cheers Novelli
Novell Master CNE + CDE

http://www.eckertweb.de