Initiation of IPLU board and IP extensions....

[Amalv12]

Hi all,

I am back again,I have bought an IPLU board and want to install it to mx-one pbx.Please could u tell me what are the commands to install the board and initiate the IP extensions.Plz help me...

I connect a LAN that has a DHCP...

Thanx in advance guys

 

[Amalv12]

WHEN I want to initiate the board

<RINII:BPOS=1-1-20,IP=192.168.32.220,MASK=255.255.248.0,GRP=1;
NOT ACCEPTED
BPOS
NOT EQUIPPED

 

[doktor]

You must first let the system find the board by CNHUI:BPOS=1-1-20;
Then you can send the other commands.

///doktor

 

[Amalv12]

Thanx alot man , I will try it ... and shall be back...

 

[Amalv12]

I tried this command but it did not work ....

<RINII:BPOS=1-1-20,IP=192.168.32.220,MASK=225.255.248.0,GRP=1;
NOT ACCEPTED
MASK
FORMAT ERROR

 

[Amalv12]

<RINII:BPOS=1-1-20,IP=192.168.32.99,MASK=255.255.248.0,GRP=1;
NOT ACCEPTED

LICENSE IS NOT AVAILABLE

 

[nerdherder27]

but in yours system you don't have this license:

VOIP-ETH-INTERFACE FAL104707
IP-EXTENSION FAL104706