INITIATING CALL DIVERSION ON DECT PHONES WHEN NOT REACHABLE

[grys1]

Hi,

I am new to Ericsson md110 BC 12 0.I would like to configure my dect phones in such a way that when the first number is called and it is not picked up,the call is transfered to the next dect phone and so on till the fourth one.
Thaks.

 

[doktor]

Use personal calling lists. PELPI.
Then the diversions will work as they should.
When the DECT handset is not reachable, the the call will go to the defined answering position.

///doktor

 

[Monrovia]

PELPIIR=XXXX,ANSPOS=XXXX,TIME=15,CHO=1;
PELPIIR=XXXX,ANSPOS=YYYY,TIME=15,CHO=2;
.
.
.
PELPI:.........................;

 

[doktor]

Yes, add LIST=1 or 2 -5 when you want to use more lists...

///doktor

 

[grys1]

Hi,
Thanks all for your answers.
The PELPI cmd is well executed;but for my first diversion(CHO1)the ANSPOS No.works like 'follow me' of the DIR.Also,there is no diversion to the rest of the numbers.What could be the problem?Please help.

 

[Monrovia]

hi

you didnt notice the xx & yy??

first choice anspos should be the same extension, where it should ring. then after 15sec of time it will go to the cho 2; same will continue according to the time & cho.

to end the profile list, use command pelpe:dir=xxxx;

BR

Monro

 

[parnum]

At the end of CHO=1 you add ,BSYCHO=2; to continue the list to CHO 2, then carry on CHO=2, BSYCHO=3; until you reach the end where BSYCHO=0; to stop progress. At this time caller gets unobtainable tone, so this is usually voicemail.

without BSYCHO, your list will stop, which is I think your last question.

best parnum