Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Infoblox

Status
Not open for further replies.

bignose21

Programmer
Jul 4, 2003
2,199
GB
Has any one any experience with Infoblox DHCP server for avaya J1xx phones, we have done a packet capture and can see the request for option 242 in the DHCP Discover but on the DHCP offer back form Infoblox we never see the option 242 in the DHCP offer. Option 242 is setup in Infoblox is there anything that needs to be specifically set to get this working? Upto now all deployed phones have been TDM so have never needed the DHCP but starting to roll out IP now. As the phone never gets off the data VLAN the option 242 is just L2QVLAN=xxx but obviously phone never moves to Voice VLAN as it never receives the option.
 
Do the Data Option 242 have L2Q=1, L2QVLAN=xxx? L2Q needs to be enabled for it to work

Today Makes Tomorrow
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top