Info for trace ISDN on DTU-ph

[Lele22]

Hi All
Any people know a programm for read a IS 3000 trace on DTU-PH?
I tray to rename a file in .exp and read with aurora expert, but not all fram are correct.
Thanks All

 

[cooldude6]

You need to do a binary conversion first. The tool is included in smpc.

 

[Lele22]

Hi colldude6

the tool is IFM IS3000 file converter?you know the extension I need to compilate when starting a trace?
I try with convert but no work...
see...333200411231232200411231232BW Application type 0 
A£-ÆTIMESYNCCIRCUIT 0 ,
ûÐ
òj €?£©ƒƒl!€3484756300p€204}‘?¡CIRCUIT 0 €q 

ôCIRCUIT 0 €W0
jô’ ¡ƒƒCIRCUIT 0  ~@

lCIRCUIT 0 
I dont know the metod....if you can help me
thanks

 

[Lele22]

Hi cooldude6

I try with converter (is IFM IS 3000 file convert) but no go see...333200411231232200411231232BW Application type 0 
A£-ÆTIMESYNCCIRCUIT 0 ,
ûÐ
òj €?£©ƒƒl!€3484756300p€204}‘?¡CIRCUIT 0 €q 

ôCIRCUIT 0 €W0
jô’ ¡ƒƒCIRCUIT 0  ~@

lCIRCUIT 0 
maybe I wrong a metod for translate a trace file
but when strating a trace what extension i need to use?

 

[cooldude6]

i guess you want an isdn trace.
The command is something like this.
strtpt:1011,19,trace.trc,1,1;
when asked for circuit choose 0;
when asked agian just ;
Now you will get a tracev1.trc

start ifm file converter, choose from iS3000 and binary.
set outfile to trace.exp

dubble click on the exp file in windows

if needed set the right protocol options in aurora expert
see setup/protcols

 

[Lele22]

thanks more