mandie1972
Technical User
having problems with clip outs & drop shadows. Everything looks ok when converting to a pdf, but once its gone to printers - a black box appears around the clipped out image.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Indesign drop shadows (mac osx)
- Thread starter mandie1972
- Start date
- Status
What level of PDF are you exporting? What version of Acrobat is your printer using? What print settings is your printer using? What RIP is your printer using.
Answers to these questions will solve the issue.
- - picklefish - -
Why is everyone in this forum responding to me as picklefish?
Answers to these questions will solve the issue.
- - picklefish - -
Why is everyone in this forum responding to me as picklefish?
- Thread starter
- #3
mandie1972
Technical User
Thankyou for getting back to me....
I'm not technically minded so I hope this info helps
One printer uses : Acrobat 6 (pdf 1.5)
and the other printer I use, uses : Acrobat 4 (pdf 1.3)
same problem using each
Don't know the other answers other than full colour magazine artwork - colours in CMYK, 300 dpi
I'm not technically minded so I hope this info helps
One printer uses : Acrobat 6 (pdf 1.5)
and the other printer I use, uses : Acrobat 4 (pdf 1.3)
same problem using each
Don't know the other answers other than full colour magazine artwork - colours in CMYK, 300 dpi
Have you output your file to Acrobat 5 or higher? Check your settings. Go to File menu/PDF export presets and pick Press. Make sure the Compatablity setting is to 5 - supporting alpha channels and transparency. Acrobat 4 has problems with these.
If you're using Distiller, open it and go to the Settings menu and make a setting that copies Press but is compatable with Ac 5. If printing a postscript file for distilling, select All under Graphics/images/Send Data. Under Advanced, select High Resolution under Transparency Flattener.
You might also try checking your transparency flattening Presets in ID - under Edit menu - set to High resolution.
Try printing it out of ID to see if you get problems. If so, you did something in ID.
After you make your pdf open it and go to the Advanced menu. Select Overprint preview and look at the pdf for problems. Then go to Transparency Flattener preview and see if anything's amiss
If you're using Distiller, open it and go to the Settings menu and make a setting that copies Press but is compatable with Ac 5. If printing a postscript file for distilling, select All under Graphics/images/Send Data. Under Advanced, select High Resolution under Transparency Flattener.
You might also try checking your transparency flattening Presets in ID - under Edit menu - set to High resolution.
Try printing it out of ID to see if you get problems. If so, you did something in ID.
After you make your pdf open it and go to the Advanced menu. Select Overprint preview and look at the pdf for problems. Then go to Transparency Flattener preview and see if anything's amiss
- Thread starter
- #5
mandie1972
Technical User
thanks for getting back to me....
when I go to transparency flattening preset it is set at high res.
Everything turns grey and the images with the clipped background and a drop shadow have a red solid box around them
thanks
when I go to transparency flattening preset it is set at high res.
Everything turns grey and the images with the clipped background and a drop shadow have a red solid box around them
thanks
- Thread starter
- #6
mandie1972
Technical User
also when I print samples of the pages the drop shadows are fine
- Status
Similar threads
- Locked
- Question