incorrect time display on two sets

[coniglio]

I have two phones on my desk (Opt. 61C, rls. 25.40). One is an M3904 and the time shows 3:50PM. The other is an M2008 and shows the time as 3:49PM. How can two phones on the same PBX show different times? there is a difference of one minutes on my phones. Thank you (I cannot wait to hear this one!)

 

[DavidGaud]

Did you try to disconnect the 2 phones and see if they get the same new clock ?

 

[coniglio]

no I didn't. What do you mean by "new clock"?

 

[DavidGaud]

The Opt61C will send its clock when you will reconnect the phone.

 

[coniglio]

unplugged both phones from respective jacks, reconnected both phones to respective jacks. 3904 now says 3:59PM and 2008 says 4:00PM.

 

[Nortellian]

it's normal.

 

[coniglio]

okay, hopefully noone else in this office who has two phones will ever notice a discrepancy. thanks, all.

 

[Nortellian]

put the phones on the same card and the times will be the same.

 

[coniglio]

thank you, Nortellian. The things I learn on this website. I learned more in the couple of years I've been on this website than in the 15 years prior.

 

[ArchTelecom]

Or tell users they can not have two phones withn 10 feet of each other.

 

[johnpoole]

if lamp audit is off in load 77, time will drift set to set. that is a known problem in rls 3, i haven't seen it in your rls

john poole
bellsouth business
columbia,sc