Incomming SIP trunk to outgoing PRI Trunk

[IPOCraft]

Hi there:

I'm trying to establish a call from a Cisco to the PSTN via E1 connected to a IPO. The trunk between IPO and Cisco in a SIP trunk. I can communicate between the two nodes (Cisco-Avaya) via trunk setup and ICR. When Cisco calls IP Office extensions, they follow the ICR rules:

- Incomming Number: blank
- Trunk: 7 (The SIP trunk)
- Destination: .

I have a Short Code 9N to ARS:Main and I trying to call from Cisco to the PSTN dialing 9XXXXXX. I see in the Monitor the call in the SIP Trunk but IPO responds "Unallocated (unassigned) number".

I trying the following ICR without success:

- Incomming Number: 9XXXXXX
- Trunk: 7
- Destination: 9#

How can I setup the IPO to act like a passover between SIP to E1-PRI?

 

[Z-man]

I am taking a guess, but since you are using trunks, you have to allow trunk to trunk transfer and/or allow off site transfer. You might be restricted.

 

[joe2938]

The ARS for the cisco would need to insert a 9, so create an ARS just for the cisco that inserts the 9. So for long distance the ARS would have 91N and local would use 9N. Worth a shot.

 

[IPOCraft]

Trunk to Trunk transfer is allowed. Cisco is sending 9 + Phone Number (96154300), but is not matching with the ARS 9N code:

76613476mS SIP Tx: UDP 192.168.0.3:5060 -> 192.168.0.254:5060
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 192.168.0.254:5060;branch=z9hG4bK9615BC
From: "IPCOMM" <sip:8720@192.168.0.254>;tag=49F3688-A13
Call-ID: 2F382DB-765B11E9-85BD95BC-7341762B@192.168.0.254
CSeq: 101 INVITE
Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,INFO,REFER,NOTIFY,UPDATE
Supported: timer
Server: IP Office 9.0.6.0 build 979
To: <sip:[highlight #FCE94F]96154300[/highlight]@192.168.0.3>;tag=8a3ee36050809af9
Content-Length: 0

[highlight #729FCF]76613478mS Sip: 18.1991.1 -1 SIPTrunk Endpoint(f4be3c28) Present Call, no match (96154300) from URI in To header or (96154300) from request URI[/highlight]
76613478mS Sip: SIPTrunkEndpointDialogOwner::SetRemoteAddressForResponse from 192.168.0.254:5060 to 192.168.0.254:5060
76613479mS SIP Tx: UDP 192.168.0.3:5060 -> 192.168.0.254:5060
SIP/2.0 404 Not Found
Via: SIP/2.0/UDP 192.168.0.254:5060;branch=z9hG4bK9615BC
From: "IPCOMM" <sip:8720@192.168.0.254>;tag=49F3688-A13
Call-ID: 2F382DB-765B11E9-85BD95BC-7341762B@192.168.0.254
CSeq: 101 INVITE
Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,INFO,REFER,NOTIFY,UPDATE
Supported: timer
Server: IP Office 9.0.6.0 build 979
Reason: Q.850;cause=1;text="[highlight #EF2929]Unallocated (unassigned) number[/highlight]"
To: <sip:96154300@192.168.0.3>;tag=8a3ee36050809af9
Content-Length: 0

It's like is searching the 96154300 extension in the IPO!

 

[busster]

My guess is the outbound callerid. If it is sending a callerid that the pri does not like, it will reject. You will probably have to force the outbound callerid.

 

[IPOCraft]

Now it's working. It needs an "*" in the Local URI field, in the URI SIP Tab of the SIP Trunk to follow the ICR rules. Otherwise it will treat the "To: Field" in the SIP messaging as an possible extension.