Hi there:
I'm trying to establish a call from a Cisco to the PSTN via E1 connected to a IPO. The trunk between IPO and Cisco in a SIP trunk. I can communicate between the two nodes (Cisco-Avaya) via trunk setup and ICR. When Cisco calls IP Office extensions, they follow the ICR rules:
- Incomming Number: blank
- Trunk: 7 (The SIP trunk)
- Destination: .
I have a Short Code 9N to ARS:Main and I trying to call from Cisco to the PSTN dialing 9XXXXXX. I see in the Monitor the call in the SIP Trunk but IPO responds "Unallocated (unassigned) number".
I trying the following ICR without success:
- Incomming Number: 9XXXXXX
- Trunk: 7
- Destination: 9#
How can I setup the IPO to act like a passover between SIP to E1-PRI?
I'm trying to establish a call from a Cisco to the PSTN via E1 connected to a IPO. The trunk between IPO and Cisco in a SIP trunk. I can communicate between the two nodes (Cisco-Avaya) via trunk setup and ICR. When Cisco calls IP Office extensions, they follow the ICR rules:
- Incomming Number: blank
- Trunk: 7 (The SIP trunk)
- Destination: .
I have a Short Code 9N to ARS:Main and I trying to call from Cisco to the PSTN dialing 9XXXXXX. I see in the Monitor the call in the SIP Trunk but IPO responds "Unallocated (unassigned) number".
I trying the following ICR without success:
- Incomming Number: 9XXXXXX
- Trunk: 7
- Destination: 9#
How can I setup the IPO to act like a passover between SIP to E1-PRI?