Incoming Only

[mynus]

I've got a weird one. This is an MICS 6.1 using a PRI and a Callpilot 150. Recently I found that half of my users weren't getting Caller ID properly on incoming calls via the CLID. So, I went through every extension, re-assigned their lines to their phones, and enabled Caller ID via the 'Telco Features' Menu. Prior to doing this, everyone had button #1 set to dial Feature 981 for voicemail. Now, everyone has button #1 assigned to their Rec'd number (last 4 digits of their DID). Not only do I not know how/why this happened, it seems I can't change it back. Any suggestions?

 

[bkrike]

you assigned their DID's to appear and ring to the phone, which gives a button for it. ( you don’t need this for CLID)

Make the lines ring only to remove the button

 

[acewarlock]

That's the targrt line Ring only.

 

[mynus]

Awesome thanks!

 

[serviceboy]

you guys are way to nice
but alas the call your vendor days are over
its a new day
a new beginning

*****may want to have more than 1 occurence of said target line*****

i ski there for i am



"There are those who would make you believe there are no choices left.That they have the last word and its final.To those who try the world is wide open choices many.To those who dont only death awaits you.